Agent-Skills.md

Agent Skills: OSPREY Contribution Workflow

>

UncategorizedID: als-apg/osprey/osprey-contribute

Repository

als-apg/osprey
als-apgLicense: BSD-3-Clause
6328

Install this agent skill to your local

pnpm dlx add-skill https://github.com/als-apg/osprey/tree/HEAD/src/osprey/templates/skills/osprey-contribute

Skill Files

Browse the full folder contents for osprey-contribute.

Download Skill

Loading file tree…

src/osprey/templates/skills/osprey-contribute/SKILL.md

Skill Metadata

Name
osprey-contribute
Description
>

OSPREY Contribution Workflow

This skill walks a contributor from "I have a change" to "merged on main." It is the connective tissue of OSPREY's GitHub Flow — branch off main, work, validate, PR, merge — wrapping the existing scripts and skills you already have so the contributor doesn't have to remember every gate.

The skill enters at whichever phase fits the contributor's current state. Run Phase 0: Orient first; the orient step decides where to pick up.

Out of Scope

| For | Use | | --- | --- | | Splitting a messy working tree into clean, atomic commits | commit-organize | | Just running pre-commit checks without the full journey | osprey-pre-commit | | Cutting a release / tagging a version | osprey-release | | Designing a new feature or capability | feature-dev / brainstorming |

Two Contributor Modes

OSPREY uses GitHub Flow with a single long-lived main branch. There are two modes; detect which one applies on first run by inspecting git remote -v:

  • Internal mode — origin points to als-apg/osprey. Contributor has push access. Flow: branch off main → push branch to origin → PR → self-merge after green CI.
  • Fork mode — origin is a personal fork; another remote (typically upstream) points to als-apg/osprey. Flow: branch off latest upstream/main → push branch to origin (the fork) → PR upstream → maintainer merges.

If neither remote points to als-apg/osprey, ask the contributor. If origin appears to be a fork but no upstream is configured, offer:

git remote add upstream https://github.com/als-apg/osprey.git

Mode detection is cheap; just re-detect each session rather than persisting.

Phase 0: Orient

Before changing anything, gather the lay of the land. Run these in parallel:

git status --short
git rev-parse --abbrev-ref HEAD
git remote -v
git fetch origin main --quiet && \
  git rev-list --left-right --count HEAD...origin/main

Decide where to enter:

| Observed state | Enter at | | --- | --- | | Uncommitted changes on main | Phase 1 (branch first, then commit) | | Uncommitted changes on a topic branch | Phase 3 (commit) | | Clean tree, topic branch, commits not pushed | Phase 4 (push) | | Branch pushed, no PR yet | Phase 5 (open PR) | | PR open with failing or pending CI | Phase 6 (watch and iterate) | | PR green, internal mode | Phase 7 (merge) | | Detached HEAD, mid-rebase, or conflicts | Resolve before proceeding |

Tell the contributor what you observed and which phase you're entering.

Phase 1: Branch

Hard block: refuse to commit while on main. Branch protection rejects direct pushes anyway, but failing locally saves the round-trip and the "rejected" error after the contributor has already typed the commit message.

  1. Sync local main against the canonical remote:

    # internal mode
git checkout main && git pull --ff-only origin main

# fork mode
git fetch upstream && git checkout main && git merge --ff-only upstream/main

  2. Suggest a branch name from the change description and validate against the prefix convention from CONTRIBUTING.md:

    • feature/<short-kebab> — new functionality
    • fix/<short-kebab> — bug fixes
    • docs/<short-kebab> — documentation only
    • refactor/<short-kebab> — internal restructuring
    • test/<short-kebab> — tests only

    If the proposed name doesn't match a prefix, warn and suggest an alternative. Accept the contributor's choice on insist — these are conventions, not invariants.

  3. Create the branch:

    git checkout -b <name>

  4. If pre-commit hooks aren't installed in this clone, offer to install them once. Idempotent and safe on every fresh clone:

    pre-commit install

Phase 2: Work

The contributor edits code; the skill is mostly absent. Two reminders:

  • Update CHANGELOG.md as you go, not at the end. Add a bullet under the relevant heading (### Added, ### Changed, ### Fixed) in the ## [Unreleased] section. Doing this concurrently keeps it accurate and turns the per-commit CHANGELOG check into a non-event.
  • Keep the change focused. If the working tree starts to span unrelated concerns (e.g., "fix bug X" plus an unrelated refactor), suggest invoking commit-organize to split it before committing.

Phase 3: Commit

Hard block: run ./scripts/quick_check.sh (~30 s) before the commit. Catches formatting drift and broken imports before they enter history. Fixing a polluted commit later is much more expensive than failing fast.

  1. Show git status and git diff --stat so the contributor sees exactly what's about to land.

  2. Stage surgically — list specific paths rather than git add -A. Blanket adds occasionally sweep up .env, scratch files, or large binaries.

  3. Run ./scripts/quick_check.sh. On failure, surface the output, suggest the minimal fix, re-run. Don't commit until clean.

  4. Compose a conventional commit message:

    type(scope): summary

Optional body. Explain *why*, not *what* — the diff already shows what.

    Where type ∈ {feat, fix, docs, refactor, test, chore, ci, build, perf}. Subject ≤ 70 chars, imperative mood ("add", not "added").

    Soft prompt: if the contributor's preferred message doesn't match the conventional form, propose a rewrite once. Accept their version on insist.

  5. Soft prompt — CHANGELOG: if CHANGELOG.md isn't in the staged set, ask whether this commit needs an entry. Some genuinely don't (pure ruff renames, internal refactors invisible to users). Don't block.

  6. Commit, then git log -1 --stat so the contributor sees what was recorded.

Phase 4: Push

Hard block: run ./scripts/ci_check.sh (~2-3 min) before the push. CI minutes are shared and PR dashboards get noisy when obviously-broken branches sit waiting for triage. Pushing only what would have passed CI respects everyone's time.

  1. Confirm the push target. Topic branches always go to the contributor's personal remote, never to upstream:

    • Internal mode → origin (which is als-apg/osprey).
    • Fork mode → origin (which is the contributor's fork).

  2. Run ./scripts/ci_check.sh. On failure, surface output, suggest the minimal fix, ask the contributor to amend or add a follow-up commit.

  3. Push with upstream tracking the first time. Confirm before — this is the first visible-to-others state-change in the journey:

    git push -u origin <branch>

Phase 5: Open the PR

Hard block: run ./scripts/premerge_check.sh main before gh pr create. Catches drift from main that surfaces only at merge time. Cheaper to find now than after CI burns minutes on the PR.

  1. Compose the PR title and body:

    • Title — short (≤70 chars), conventional-style summary of the branch theme. If there's only one commit, that subject line is usually right.
    • Body — pull from the commit messages and the CHANGELOG entries. Sections:
      • ## Summary — 1-3 bullets, why this change.
      • ## Changes — what landed.
      • ## Test plan — bulleted checklist of how this was validated.
      • ## Related issues — if any.

  2. Show the contributor the draft. They can edit before it goes out.

  3. Open against als-apg/osprey:main:

    # internal mode
gh pr create --base main --head <branch>

# fork mode (gh handles the cross-repo head spec)
gh pr create --repo als-apg/osprey

  4. Print the PR URL and remind the contributor that CI will start running.

Phase 6: Watch CI and Iterate

gh pr checks --watch

When checks complete:

  • All green → Phase 7.

  • Failures — fetch the failed run's logs, summarize the root cause, suggest a minimal fix. The contributor edits, re-stage, re-commit (or git commit --amend if the broken commit is the tip and not yet pulled by anyone else). Push again. Loop.

  • Stale checks because main moved — rebase:

    git fetch origin main && git rebase origin/main
git push --force-with-lease

    Always --force-with-lease, never plain --force — the lease prevents clobbering work someone else might have pushed to your branch in the meantime. Walk through any conflicts manually; do not force-push past a conflict the contributor hasn't reviewed.

pre-commit.ci runs as a required check and may auto-fix style by pushing a commit to your branch. If you see "pre-commit.ci - autofix" land, just git pull --rebase before the next push.

Phase 7: Merge

Internal mode — when CI is green:

gh pr merge --rebase --delete-branch

--rebase because branch protection requires linear history; --merge would be rejected. --delete-branch because long-lived branches aren't the model.

Fork mode — comment on the PR and ping a maintainer; merging is theirs to do. The maintainer will use the same --rebase --delete-branch from their side.

After merge, sync local:

git checkout main && git pull --ff-only origin main

The journey ends here. The next change starts again at Phase 0.

Confirmation Pattern

Before any state-changing operation — git commit, git push, gh pr create, gh pr merge — show the contributor exactly what's about to happen and ask them to proceed. Reads (status, diff, fetch, log) don't need confirmation.

The point is: every visible-to-others action has a deliberate moment where the contributor sees what's about to ship and can stop it.

Branch-Protection Reality Check

A few facts about OSPREY's main branch protection that shape behaviour here:

  • All 8 required CI checks must pass before merge. There is no admin bypass; enforce_admins is on. If a required check is genuinely wrong (a flaky runner, a broken matrix), fix it forward — don't try to bypass.
  • Linear history is required — that's why merges always use --rebase and rebases use --force-with-lease.
  • Direct push to main is rejected. This skill never tries; the hard block in Phase 1 mirrors the server-side rule so the contributor fails locally instead of after typing a commit message.
  • PR approvals are not required (required_approving_review_count: 0), so internal-mode contributors can self-merge once CI is green. Fork-mode contributors still need a maintainer to merge.

If the contributor hits an unexpected branch-protection error, surface the GitHub message verbatim; the skill should not pretend the rules are looser than they are.